2.48m x 1.8m Cedar Shed - The Hyland
Model No. Hyland 8' x 6' (S3015)
Gallery: Check Out The Features
Tick All The Boxes with the Stilla Range of Cedar sheds
Photo is indicative only. It is a collage illustrating the various features in the cedar shed range. It may not fit all models.
Garden Shed, Timber Shed, Cedar Shed
The Hyland 8′ x 6′
Shed Smart Rating
5 / 5 : Rated for Price / Quality / Warranty / & Ease Of Assembly
Stilla: 100% Australian Made / 100% Australian Owned
Western Red Cedar Timber Sheds
Base: Front / Width 1.884m (Where the door is located) Base: Side / Depth 1.8m Overall Height 2.36m (Highest point of roof) Min. Wall Height 1.8m (To the top of the door frame - for door clearances, see note below)
Orders for this product will go into production & it is estimated that the manufacturer will dispatch in approximately twenty (20) working days. (This is subject to change by the manufacturer – although the majority of orders are finalised well within this period. A time allowance for the freight company to complete the delivery must also be allowed.)
Assembly System: The shed is made up of individual sectional pre-assembled panels that are joined during installation to make up the walls. Quick & easy. Doors: Single reinforced full height hinged door opening outwards. Door in the gable front. Door has a fixed tinted acrylic window. Door Security: T Handle Keyed Lock Door Clearances: 1885mm H x 840mm W Window: One fixed tinted acrylic window in door is standard Roof Line: Gable roof - Peaks above front & rear walls Roof Finishes Available: All roofs are supplied as standard in Colorbond: Woodland Grey. Additional colours (as listed) are available as optional extra additions. Wall Finishes: Western red cedar sheds are supplied in a raw state. They are not stained or painted - allowing you to apply the finish of choice or leave raw. Material: Canadian Western Red Cedar 18mm thick VJ cladding Extremely high natural thermal insulating quality Framework Termite resistant treated structural pine 42 x 42mm framing studs Sustainability: Cedar is grown and harvested through environmentally responsible & sustainable planting and re-forestation practices. Flooring: The cedar sheds are not supplied with a floor. They can be fixed to an existing concrete slab or paved area. Optional standard & heavy duty timber floors are available for purchase if required. Concrete Slab: Recommended minimum concrete slab dimensions are the external base measurements of this product + 100mm in each direction. Warranty: 10Yr. Manufacturers' Warranty Engineering Drawings & Certificates: Not applicable DIY Friendly: Yes - Est. assembly time: 3-3.5hrs / 1 person
- Colour swatches are shown in the order completion section of this product page. Please note: the finishes shown have been reproduced to represent actual product colours as accurately as possible. However this representation may be subject to the limitations of web palette colours, or your screen & printers settings. These may affect colour tones.
- Before any purchase is made, please check with your local authority to determine and understand any building approval or product wind rating compliance requirements, that may exist (at your installation address). Where applicable, all building approvals should be attained before any purchase is concluded.
This is a Building Code Of Australia: Class 10A building (Private, Non-Inhabitable)
- DIY Friendly – Yes √ Uniquely designed and manufactured for the DIY’er
- Pre-assembled wall sections for quick & easy assembly –Yes √
- Easy to use assembly manual – Yes √
- Components measured and pre-cut for even faster assembly – Yes √
- Designed for style, practicality, strength, value, and the “best-in-market” hassle-free DIY installation experience – Yes √
- Door Security – Yes √ T Handle Keyed Lock
- Superior wall rigidity – Yes √
- Termite Free / Fantastic Thermal & Insulation Qualities / Easy DIY Assembly / Weatherproof – Yes √
- Low Maintenance – Yes √
Available Options & Accessories
Refer to detail in the separate “Options & Accessories” tab of this product page
- Standard rebated timber flooring kit
- Heavy duty timber flooring kit
- 8Ft loft shelf
- Double door conversion
- Opening window(s)
- Lean-Too or Annex Add On
- Optional alternative Colorbond roof colours
1 Pallet: 1920mm L x 960mm W x 520mm H
Sample image of a main pack:
Options And Accessories
Timber flooring kits:
There are two types of timber flooring kits for the cedar sheds –
- Standard rebated floors &
- Heavy duty floors
Standard rebated floors:
These are made to provide a platform onto which your shed can be secured to. They are made to lay directly on to a flat & level ground.
These floors are rebated i.e. they provide a raised decking section inside the shed. The walls extend past the internal decking & sit on the floor frame at a lower level. This assists in minimising weather penetration from under the walls. Made of treated pine building materials.
Heavy duty floors:
These are made to provide a platform onto which your shed can be secured to. The heavy duty floor option allows (where required) for the floor to be elevated with the use of posts. Ideal for slopes or damp areas. Larger floor joists are used to accommodate elevated loads – Top decking boards are the same as those used on the standard floor.
Conversion to double colonial doors:
This shed can have its single hinged door upgraded & converted to have two(2) colonial doors. Each door is supplied with fixed tinted acrylic windows.
Door clearance dimensions for the double doors are as follows – 1885mm H x 1440mm W
Opening tinted acrylic windows:
Optional opening windows are in addition to any standard window inclusions (fixed or opening) that are supplied with this model.
They can be placed in each side wall, or rear wall. Each wall is made up of multiple panel sections, that are fixed together. The window can be positioned in the centre of one of these individual panel sections. (Note: This may not be the horizontal centre of the completed wall width)
8ft Loft shelf:
The loft shelf is made to be fitted towards the top of the rear wall of this shed.
The skylight is a poly carbonate sheet that replaces a metal roof sheet. It is opaque & allows diffused natural light to enter the shed.
Lean-Too Or Annex Addition:
The lean-too or annex additions provide additional undercover usable space.
The difference between the two is their width. The lean-too is 1150mm wide (including roof overhangs) & the annex is 2050mm wide. The length of of both the lean-too & annex is determined by the shed model – as they run the entire length of the roof dimension they are fixed to.
On models that have the gables at the front (where the standard door(s) are located) – the lean-too & annex runs down the side wall of the shed & protrudes out from the side wall.
On models that have the gables in the side walls & the front (where the standard door(s) are located) has the roof line slopping down towards the front wall- the lean-too & annex runs across the front width of the shed & protrudes forward over the front wall.
Shipping & Delivery
Stilla timber products are made, held, dispatched and shipped – by the manufacturer in Brisbane.
For estimated dispatch and freight consignment time frames – please refer to the “Availability” section in the “Specifications: Snapshot” tab of this product page. Note, this advice is an estimate only and is the most current notification as provided by the manufacturer. This estimate may vary and be subject to change. Unforeseen or unadvised production or dispatch circumstances, experienced by the manufacturer, may occur.
The estimated number of working days shown, is for the manufacturer to dispatch the ordered item(s). Allowance needs to be also made for the delivery (shipping & handling) of the order, by the manufacturers’ contracted freight carrier. Delivery times vary based on freight company handling volumes, the ordered product size and delivery destination.
For this product, the manufacturer offers a paid assisted home delivery option:
Paid Home Delivery
The manufacturer will ship your order to your nominated address, for a fee. This fee varies and is based upon the product ordered, its weight, volume, configuration and the delivery destination.
The fee for paid home delivery is calculated and shown for your consideration, during the ordering process, before you decide to add the order to the online shopping cart & complete your purchase.
Upon arrival of your order at the freight carriers regional distribution centre closest to your destination address, they will call and make coordinated delivery arrangements with you. The customer, or their arranged & authorised nominee, is to be present to receive and sign for the delivery.
All home deliveries are to the front of the property only. They do not allow for placements down the side or the rear of the property.
Please note the following conditions for home deliveries, as offered by the manufacturer and their contracted freight carrier:
Selecting Paid Home Delivery is the customer’s acceptance of the terms and conditions as they pertain to the delivery of this product(s).
The delivery address must offer appropriate access for a tailgate truck, so that the delivery can be completed.
Delivery of Garden Sheds & Aviaries are Assisted Deliveries. This means that there must be an able bodied person present at the coordinated time of delivery, to receive the order and may be requested to assist the delivery driver, with the unloading of their order.
If there is any failure in meeting these agreed conditions, additional delivery and handling fees may be incurred. Charges from $90+gst may be levied by the freight carrier, if the coordinated delivery cannot be completed. Where applicable, this impost will be charged through to the customer.
I've Placed My Order - What Now?
Once your order has been reviewed, processed and completed by DiscountSheds.com.au staff, the manufacturer receives all order details and commences the dispatch (or where applicable) the production process.
For estimated dispatch time frames – please refer to the “Availability” notice in the “Specifications: Snapshot” tab of this product page. Note, this advice is an estimate only and is the best and most current notification as provided by the manufacturer. This estimate may vary and be subject to change where the manufacturer may experience unforeseen production or dispatch circumstances, which may result in extended times required to fulfil an order.
Upon dispatch, your order is consigned to the manufacturers’ contracted national freight carrier for handling, distribution and delivery.
An allowance also needs to be made for the time required for the handling and delivery of the order. Delivery times vary based on the freight companies handling volumes, the ordered product size and delivery destination.
Once you order arrives at the closest freight distribution centre to your location, the freight carrier will call to to co-ordinate with you the home delivery arrangements.
Receiving Your Order:
It is extremely important that attention is paid before you sign for and receive the goods. Signing for the goods denotes the customer has received all goods as ordered & that they are in a good and fit condition.
Even though great care is exercised by both the manufacturer and their freight carrier and agents, in some circumstances, the goods may either be damaged in transit, or be issued in error or incomplete.
The following steps should be followed to ensure you are receiving the complete product you have ordered:
√ Check the product/model no. on all box labels, to ensure it agrees with the item you have ordered (this information is noted on your web order confirmation and emailed tax receipt)
√ Check the box labels to verify that all the boxes that make up your model no. are presented. Box labels will show how many packs make up that model. For example – The box label will shown the Model No. & then state that the particular box is number __ from a total of __. If the label says that the box you are looking at is pack 1 of 2, then there should be a second pack. Please check that second box/pack to ensure it is the correct one for the ordered model, by checking the model number shown.
Damages & Shortages:
Within thirty (30) days of the receipt of the goods, you should inspect the product(s) in its entirety. The inspection is to satisfy that the product is in sound condition & is complete. You must notify discountsheds.com.au (the retailer) of any fault, damage or shortages of the goods and their component parts. We will then contact the manufacturer and lodge your claim request, along with our instruction for timely corrective measures, where required.
Do not attempt to assemble the product until you are in possession of all required components. This is ascertained by following the manufacturers’ written general instructions in the assembly manual. Carefully unpack the carton(s). Identify and check off the included parts and components against the parts illustrated and described in the manual. Partial and incomplete assembly (whilst waiting for the supply or re-supply of any reported missing or damaged parts) may result to damage to the structure, for which the retailer and the manufacturer are not responsible for.
Great care is employed by both the manufacturer and their freight carrier and agents, in supplying you with your quality product. Although it may be an exception to the general rule, errors in dispatching or damages incurred in the transportation of the product, may occur. To rectify and resolve this issue expeditiously, the shortage or nature of the damage should be reported in as much detail as possible. In order to initiate the supply or reissue of missing or damaged components, the manufacturer’s require the following in a written email, for their action –
- The email is to reference your Discountsheds.com.au Tax Invoice/Receipt Number (as emailed to you by Discountsheds.com.au upon processing of your online or phone order). Note this is different to the automatically generated web order ID. It allows us to identify your order & index it to the manufacturers reference number for your transaction.
- The email is to be forwarded to: firstname.lastname@example.org
- The email is to list any and all, missing or damaged parts that require reissue or replacement (tabled in one item of correspondence). This information must be sourced & noted from the products assembly manual components list, as follows: Quantity, Part Description, & Part No.
If a claim is being made for parts that are damaged, the manufacturers require photos to be attached to your email, that clearly show the damage referred to. Please include adequate detail in the photos for the manufacturer to review the nature and extent of the damage. Photos from afar ( a few steps back showing damages to packaging or material), as well as close up detail, to show damage to parts – would be ideal.
These submissions are requested & required by the manufacturers. It is important for their quality assurance program and where applicable, their possible freight insurance claims.